Modeled on the angular wings of an F-117 Nighthawk fighter jet, a roof made from composite sandwich panels soars atop a lounge and deck above the penthouse of a Sydney, Australia, apartment. Part roof, part sculpture, the structure, which was designed by Australian architect Richard Goodwin, isn’t merely eye-catching. It also reduces the building’s carbon footprint by channeling rainwater into ground level tanks.
The roof features 1200g quadriaxial E-glass/KINETIX epoxy skins with a 60mm end grain balsa core (150kg/m3) fabricated by ATL Composites of Queensland, Australia.
“The fabrication involved an internal steel skeleton, much like an aircraft wing spar arrangement, with the composite panels forming the structural shell,” says ATL CEO Lorraine Duckworth. She adds that the design offered the best way to bring Goodwin’s design to life – especially a 17.5-meter-long cantilevered section.
“The challenges of weight, strength and stiffness associated with a cantilevered roof of this size made it a natural for composites,” she says. “With its unique shape and associated loads, it could not be achieved with normal steel fabrication.” The balsa also provides excellent fire performance, as well as sound and thermal insulation.
The roof features ATL’s DuFLEX® panels, which are available in prefabricated kits. The company used hot compression molding to manufacture the 3.6 x 1.2 meter panels. Duckworth says this method increases E-fiber volume, producing panels with 62% E-glass fiber volume by weight. It also saves time and resources. The panels were finished with peel ply to protect the laminate.
“Time-consuming laminating, coring and vacuum bagging steps normally required to fabricate high-performance composites are avoided,” Duckworth says. “And material waste, labor and tooling costs are also greatly reduced.”
Once cured, the roof panels were cut into the required component shapes using a CNC router. Each pre-cut part remained attached to the panels with one or two small tabs to ensure they remained secure during shipping to Azzura Marine in Sydney. Once there, the small tabs were cut, and the individual roof parts were removed and joined to the underlying stainless-steel frame.